Author : Dony Paulose1, Annu Ann Jacob2, Hemalatha G
Abstract : This project is based on the analytical investigation carried out to study the feasibility of implementing water tank and roof top frame as passive Tuned Mass Damper (TMD) using SAP2000 and ANSYS. The idea of seismic response control of the structures by using TMD’s is considered for this study. A tuned mass damper (TMD) is a device consisting of a mass, a spring, and a damper that is attached to a structure in order to reduce the dynamic response of the structure. The frequency of the damper is tuned to a particular structural frequency so that when that frequency is excited, the damper will resonate out of phase with the structural motion. Energy is dissipated by the damper inertia force acting on the structure. Water tanks are integral part of all buildings and they impart large dead load on the structure. This additional mass can be utilized as TMD to absorb the extra energy imparted on the structure during earthquakes. The main objective of this project is to find the response reduction of structures subjected to various earthquake data’s using different mass ratios. Response of the structure was studied using the Newmark method. Multi-storey concrete structures were taken for the study. The water tank and roof top frame was placed at the top. The mass and frequency of both were tuned to the optimized values. The behavior of the tank and roof frame subjected to earthquake data, namely, El Centro was studied. The results show that if the same is tuned properly, it can reduce the peak response of structures subjected to seismic forces and a great reduction in the displacement is observed.
Keywords : TMD, Passive Control Systems, El Centro, Inter-storey Drift, Newmark method
Full Issue
| View or download the full issue | PDF 41-55 |