Vol 3, No 1 (2018)

Mechanical Properties of Polypropylene Fiber Reinforced Self Curing Concrete

Authors: D.Surendran, M. Boopathi, J. Balaji Praveen, S. Ayswarya

Abstract: Today concrete is most widely used construction material due to its good compressive strength and durability. Depending upon the nature of work the cement, fine aggregate, coarse aggregate and water are mixed in specific proportions to produce plain concrete. Plain concrete needs congenial atmosphere by providing moisture for a minimum period of 28 days for good hydration and to attain desired strength. Any laxity in curing will badly affect the strength and durability of concrete. Self-curing concrete is one of the special concretes in mitigating insufficient curing due to human negligence paucity of water in arid areas, inaccessibility of structures in difficult terrains and in areas where the presence of fluorides in water will badly affect the characteristics of concrete. The present study involves the use of shrinkage reducing admixture polyethylene glycol (PEG 400) in concrete which helps in self curing and helps in better hydration and hence strength. In the present study, the affect of admixture (PEG 400) on compressive strength, split tensile strength and modulus of rupture by varying the percentage of PEG by weight of cement from 0% ,0.5%,0.75%,1%,1.25%,1.5% were studied M25 mix. It is also studied with 0.35% of polypropylene fiber. It was found that PEG 400 could help in self curing by giving strength on par with conventional curing. It was also found that 0.75% of PEG 400 for weight of cement was optimum for M25 grade concrete with and without polypropylene fiber for achieving maximum strength without compromising workability. It is also found that polypropylene fiber gives more strength than conventional concrete.

Full Issue

View or download the full issue PDF

Table of Contents