Vol 7, No 2 (2022)

A Study on the Mechanical Properties of Concrete with Flyash and Nano-Silica

Author:- P. Guruswamy Goud

Abstract:- Concrete is the most common used material for construction and their design consumes almost the total cement production in the world. The use of large quantities of cement produces increasing CO2 emissions and as a consequence the greenhouse effect. A method to reduce the cement content in concrete mixes is the use of Flyash and silica fines. One of the silica fines with high potential as cement replacement and as concrete additive is nano-silica (NS). This would save not only the natural resources and energy but also protect the environment with the reduction of waste material. The present work deals with addition of Flyash and Nano-silica to concrete as partial replacement to cement in 10%, 20% & 30% and dosages of 1%, 1.5% and 2% respectively by weight of cement. Based on early research M20 grade concrete has been chosen for this work. The mix design was prepared using IS: 10262-2009 Guidelines for concrete mix design proportioning. In the present work 117 numbers of specimens were casted (78 numbers of cube moulds and 39 numbers of cylinder moulds) with addition of Flyash and Nano-silica in different proportions which are tested for compressive strength and split tensile strength. Addition of Nano-silica to normal cement concrete show increase in compressive strength and decrease in splitting tensile strength. SEM (Scanning Electron Microscope) analysis evidence the direct involvement of Flyash and Nano-silica in region of specimen.

Keywords:- Nano-silica, Compressive strength, Split tensile strength, SEM (Scanning Electron Microscope)

Full Issue

View or download the full issue PDF 48-55

Table of Contents