Vol 6, No 3 (2021)

Experimental Study on Super Plasticizer and Water Based Curing Compound

Authors: P.Guruswamygoud, M.Rajasekhar, V.Madhukrishna, N.Vijayakumar, P.Anil

Abstract: This paper presents the results of an experimental research on the workability and compressive strength of ordinary and standard concrete. Superplasticizers are commonly known as High Range Water Reducers (HRWRs) because it permits low water cement ratio as well as the workability also affected. In this paper the properties of concrete mixtures with three different dosages of superplasticizers SNF have been investigated. In this experimental programme superplasticizerfosracconplast 430wp of basically modified naphthalene/melamine formaldehyde sulphonate dispersion and having brown liquid confirming to IS: 9103- 1999 & IS: 2645, ASTM C 494/C494M, Type F has been used. The properties investigated are workability on the fresh state and compressive strength on the hardened state of concrete by using three mixes with three superplasticizer dosages (0.8%, 1% ,1.5%and 2%) is used. concrete mix M-20 by IS 10262: 2009, Concrete Mix Proportioning - Guidelines. Compressive strength at 7, 14 and 28 days was also determined. The graphs between different percentage of superplasticizers with W/C ratio and compressive strength are plotted. Overall 16 specimens (concrete cube) with the dimension of 150 mm x 150 mm x 150 mm were fabricated at laboratory.

The effectiveness of water-based curing compound (WBCC) applied to concrete surface at different elapsed time from casting on the various properties of OPC, silica fume (SF) and fly ash (FA) concrete. It also signifies the importance of utilizing moist curing prior to applying WBCC. A series of OPC cylindrical concrete specimens made with a constant water-binder ratio of 0.50 were prepared. For the first series, the casting surfaces were sprayed with WBCC after various elapsed periods from casting, 1, 2, 3, 4,24 hrs, while, for the second series, the casting surfaces were pre-cured with water for 1, 3 and 7days prior to the application of WBCC. The third and fourth series of samples were exposed to air and water curing regimes, respectively, until the age of testing (28 days). Various test techniques, namely strength, hardness, capillary absorption and porosity, were applied on the series of samples to assess their mechanical and durability related properties. It was found that the efficiency of WBCC is significantly dependent on the time of its application, used blending material, period of pre- water curing specified prior to its application and considered property of concrete. Increasing the time of application of WBCC from casting can lead to diminishing the possible positive effect of using such regime of curing.

Keywords: Curing Compounds, Silica Fume, Sorpivity, Fly Ash, Microstructure of Concrete, Admixture Modified Poly Carboxylate Concrete, Compressive Strength, Superplasticizer, Water Cement ratio and Workability etc.

Full Issue

View or download the full issue PDF 1-9

Table of Contents