Vol 5, No 1 (2020)

Experimental Study on Impact of Mortar Using Silica Fume in Varying Percentage

Authors: Dr. P. R. Dhevasenaa, Dr. S. S Jayaaruna

Abstract: The main objective of our project is to evaluate the strength of mortar by using silica fume. Silica fume is a highly pozzolanic materials, because it consists of silica in non-crystalline form with a high specific surface. This study is an experimental on the nature of silica fume and its influences on the properties of mortar. The partially replacement of cement by silica fume shows the strength parameters of mortar. First the strength parameters of mortar without any partial replacement were studied then strength parameters by partial replacement with silica fume have been studied by placing cube on compression testing machine.

In this experimental investigation, Cement is replaced by silica fume with varying percentage of 5%,10%,15%,20%, and 25%. Compressive strength was conducted at 7 days, 14 days and 28 days. Silica fume were used to replace 0% to 25% of cement. The results showed that partial replacement of cement with silica fume had significant effect on the compressive strength of cube. The strength of mortar increases rapidly as we increase the silica fume content and the optimum value of compressive strength is obtained at 15% replacement.


Full Issue

View or download the full issue PDF

Table of Contents