Vol 5, No 1 (2020)

Geometry Modification of Switched Reluctance Motor

Abstract

The aim of the project work is to design and simulate a new geometry of Switched Reluctance Motor (SRM) which has higher number of rotor poles than stator poles. By using a newly defined pole design formula, a new combination of the stator–rotor poles has been proposed. A new SR motor with ten rotor poles and six stator poles is modelled. Owing to a rigid structure and the absence of magnetic source on the rotor, a switched reluctance motor (SRM) is inherently robust and cost effective. In spite of these advantages, several challenges in the control of this motor remain an issue, including high levels of torque ripple, acoustic noise, and a relatively low torque density. Thus a new model is presented which reduces torque ripple and increases torque production density. From the simulation analysis of a 6/10 configuration, it has been observed that this machine produces higher torque per unit volume and torque ripple when compared to 6/4 SRM.

Keywords: - Low torque ripple, High torque density, Switched reluctance motor (SRM).

Full Issue

View or download the full issue PDF 14-32

Table of Contents