Vol 4, No 2 (2019)

Analysis and Performance Evaluation of Twin Crank Agitator Machine

Abstract

Mixing process is a simple yet critical process used in almost field of applications ranging from mechanical, chemical and pharmaceutical industry. A wide spectrum of machines and method are available in market to achieve a good quality of mixture. The most common being a stirrer attached to a geared motor that rotate freely in the container carrying the fluids to be mixed, rate of mixing can be varied by changing the speed of the stirrer. But in process a powder is too mixed with a fluid and if the specific gravity of powder is slightly higher than the vehicle fluid, then the above mentioned stirrer proves ineffective due to effect of centrifugal force on the particles of the powder. In such cases an entirely different approach to mixing is needed where in the stirrer should also have an up-down or to-from motion to ensure that the particles do not settle down in container and there is an enough agitation and turbulence to carry out uniform dispersion of the powder particles all over the mixture. The paper introduces to twin crank agitator mixing mechanism coupled to a rotating container mechanism. The object is to carry out design and analysis of critical components of the twin crank mechanism and also to carry out the productivity test of the machine under consideration.

Keywords: - Powder, Vehicle fluid, Agitator, To -from motion

Full Issue

View or download the full issue PDF 111-126

Table of Contents