Wire Electrical Discharge Machining of Hardened Tool Steel: Effect of Process Parameters on Material Removal Rate and Surface Finish
Abstract
Wire electrical discharge machining is a non-traditional process capable ofcutting hard, electrically conductive materials into intricate profiles that aredifficult to produce by conventional methods. Its performance, however,depends strongly on the selection of electrical process parameters. This paper investigates the effect of pulse-on time, pulse-off time, and dischargecurrenton the material removal rate and surface finish during the wireelectrical discharge machining of a hardened tool steel. Experiments wereconducted at several parameter settings, and the material removal rate andsurface roughness were measured. The results show that material removalrate increases with both pulse-on time and discharge current, as more energy is delivered per discharge, but that surface roughness deterioratescorrespondingly because larger discharge craters are formed. Pulse-off timeinfluences flushing and process stability. A trade-off therefore exists between productivity and surface quality, and the appropriate parameter selection depends on whether rough cutting or fine finishing is required. The study provides practical guidance for parameter selection in the wire electrical discharge machining of hardened steels. KEYWORDS: Wire Electrical Discharge Machining, Non-TraditionalMachining, Material Removal Rate, Surface Roughness, Pulse-On Time,Discharge Current, Hardened Tool Steel
Full Text:
PDF 33-40Refbacks
- There are currently no refbacks.